User`s guide

Loading the Ink Cartridges

Preparing for Printing

Step 5:

After this message, automatic ink replenishment begins.

The “ink refill” message means that ink is being filled into the ink supply system (tubing +

head). The printer is now ready to print.

Caution:

During ink replenishment, never cut off the electricity. This may cause

damage to your printer.

· In case of a power failure during ink replenishment, proceed as

follows:

. Switch off the unit (Power Switch) and check to restore the power.

. Switch on the unit and check that it gives no error messages in the

display.

. Perform a cleaning cycle and check the test plots.

4. Rep

eat step 3 until plot quality is acceptable.

Ink Refill rest 1 M

Note:

· In case the ink cassettes are installed and the display message “NO

CARTRIDGE” still appears, this means that the ink cassettes are not

inserted correctly. Pull out the cassette(s) indicated and try to insert it

(them) correctly.

· In case of failure of initial ink replenishment, apply head cleaning a

couple of times. If the ink replenish does not commence after several

head cleaning cycles, contact your dealer.

If the display shows “not original ink” please

contact your ink supplier

and make sure to get original Mutoh

Falcon Outdoor ink.

Falcon Outdoor 46/62 USER GUIDE (AP-75046)