User`s guide
Loading the Ink Cartridges
Preparing for Printing
Note:
· In case the ink cassettes are installed and the display message “NO
CARTRIDGE” still appears, this means that the ink cassettes are not
inserted correctly. Pull out the cassette(s) indicated and try to insert it
(them) correctly.
· In case of failure of initial ink replenishment, apply head cleaning a
couple of times. If the ink replenish does not commence after several
head cleaning cycles, contact your dealer.
· If the display shows “not original ink” please contact your ink supplier
and make sure to get original Mutoh Falcon Outdoor ink.
B. Installing Ink Cassettes.
Step 1:
The power switch is located at the right side of the printer,
below the printer body.
Turn the switch ON and put the hold lever in the DOWN
position.
Step 2:
The printer starts up its initialization routine and the printer display shows the following
message:
Y: Yellow
M: Magenta
C: Cyan
K: Black
O: Orange or Light Cyan
G: Green or Light Magenta
[Y M C K O G] No cartridge
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 43