User`s guide

Assembling the Printer
Remove the tape that locks the sheet-off mechanism during transportation
(See 6 on figure below).
S
tep 4:
Remove the cable block(s) between rail and cover (
7
).
Remove the lever block (
8
).
S
tep 5 :
Install the Waste Bottle (2 screws). Do not forget to connect the connector and the waste
tubes.
S
tep 6:
After setting up the printer, wheel it to the
desired location and lock the caster wheels.
36 Falcon Outdoor 46/62 USER GUIDE (AP-75046)