User`s guide

Assembling the Stand

Preparing for Printing

Caution:

· Before lifting the printer body out of the box, make sure to remove all

plastic wrapping materials first, in order to avoid that the machine slips

from your hands.

Step 1:

Unpack the stand and assemble it by screwing the left and right stand legs to the cross

beam (upper bar)

(1)

and to the cross bar (lower bar)

(2)

. To do this, use the 4 long

hexagon bolts and the large hex wrench provided to secure the cross beam

(1)

, and 2 long

hexagon bolts to secure the cross bar

(2)

. Make sure the caster wheels are on the front.

After securing the bolts permanently, put on the two plastic side covers.

Falcon Outdoor 46/62 USER GUIDE (AP-75046)