User`s guide

Control Panel Names
- Pressing
RESOLUTION
will change the output
resolution between
360 DPI, 720 DPI or 1440
DPI.
The set-up can only be changed in idle
status.
- When pressed together with the [shift] key
(9)
it
allows reverse manual roll feed.
- Select the
previous menu option
and
decrease
a parameter
value when in
menu mode
operation.
- If
both LEDs are ON simultaneously
the plotter
operates in
one of the 3 available 1440 dpi
modes (horizontal, vertical or diagonal).
- The LED indication is also changed by data
coming from the RIP software.
7. Media :
- Allows
selection among roll, cut-sheet or
media take-up system support.
- When pressed
together with the [shift] key
(9),
generates a
nozzle check print.
-
Accept a new setting
when in
menu mode
or
enter a lower menu level.
8. Menu Mode Operation :
The
Menu Mode Operation
is used to change printer
settings and parameters. Menu Mode related buttons
are enclosed in the yellow area.
6. Resolution :
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 23