User`s guide

#Nothing happens after the computer sends data
Possible Cause Remedy
Reference
Page
Page 67
Page 40
Page 191
Page 198
#When printer sends data, the printer shows and error and
does not print
Possible Cause Remedy
Reference
Page
Page 68
#Parts of the print are dirty or missing
• If the media is not media specified by Mutoh, you may be
unable to obtain proper printing quality.
Possible Cause Remedy
Reference
Page
Page 48
92
When Trouble Strikes
(1) Is the interface cable con-
nected?
(2) Are ink cartridges
installed?
(3) Do they contain ink?
(4) Have you replaced the
waste bottle?
Refer to "Connecting the inter-
face cable".
Install ink cartridges.
Replace ink cartridges.
Replace waste bottle.
(1) Does the computer have
the proper type of equip-
ment selected?
(2) Do interface conditions
and command modes
match on both computer
and printer?
Check that the equipment type
settings are the same on both
the computer and printer.
(Refer to "To receive data from
the computer".
NOTE
(1) Is the media damp?
(2) Are you using creased or
wrinkled media?
Replace with new media.
When Trouble Strikes
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 203