User`s guide

• Dust and scraps of paper tend to accumulate over time on the
platen and cutter groove. This leads to poor quality printing
and cutting.
Use a soft damp cloth to wipe away any paper scraps clinging to the pressure
roller.
Clean the drive roller with a nylon brush.
• Paper scraps on the pressure roller and drive roller may pre-
vent the media from feeding properly and produce a "Jam
check error".
Use a cotton swab to clean dust and paper scraps from the cover of the media
sensor at the rear.
Bend the swab as shown in the diagram.
Cleaning the Printer
Daily Maintenance
IMPORTANT
Brush
Drive Roller
IMPORTANT
Media Sensor Cover
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 189