User`s guide

Media replacement request
Media is loaded but the next process
has failed. The lever was raised during
printing or cutting and lowered again
without the media having been
removed. Remove the media.
Roll media end
The end of the media was detected
when roll media was initialized.
Replace the roll media.
No waste box
The waste bottle is not installed. Install a
waste bottle.
Check waste box
The waste bottle is becoming full.
Waste box full
The waste bottle is full of waste liquid.
Take out the waste bottle and empty
the waste bottle.
Re-install a waste bottle.
Request to insert ink cartridges of the same type
The type of ink cartridges was
changed (from dye to pigment or from
pigment to dye) during cleaning or ink
filling. Replace with original cartridge
type.
Messaged Errors and Countermeasures
Details of the Display
Remove Med i a
End o f Ro l l
No Waste-InkTank
Check Waste Ink
Ful lWasteInkTank
Ink Change
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 175