User`s guide

Cleaning in progress
The print heads are being cleaned.
Please wait.
Media initialization in progress
Media is being initialized. Please wait.
Printer Status Display
Details of the Display
Cleaning
Con f i rmPape rK i nd
The normal operating condition of the Heater System is displayed on the Heater System Display.
Heater running situation
The Front and Rear Heater is ON.
Heater ON (F,R)
The left of line 1~line 3 shows the parameters of Front Heater and the right of
line 1 ~line 3 shows the parameters of Rear Heater.
ST means "Set Temperature", which shows the last time temperature-set. There
are four buttons used to set the temperature :
- Left-Up Button to increase Front ST
- Left-Down Button to decrease Front ST
- Right-Up Button to increase Rear ST
- Right-Up Button to decrease Rear ST
RT means "Real Temperature", which shows the Front Heater temperature and Rear
Heater temperature detected by the sensors.
Line 4 shows the Heater running situation:
Heater running situation
The Front Heater is ON and the Rear
Heater is Off.
Heater ON (F)
Heater running situation
The Front Heater is Off and the Rear
Heater is ON.
Heater ON (R)
Heater running situation
Both heaters are Off.
Heater Off
Heater running situation
When the fans of the printer stops running
for two minutes, the Heater System enters
sleep status (saving energy).
Heater Standby
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 173