User`s guide

Utility Settings: Fill
How to Set Parameters
Caution:
· Before starting the "fill" procedure, please be sure to empty the waste
ink bottles. The waste ink bottles must be empty.
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Utility" menu by pressing
the [Menu Up] key or [Menu Down]
key.
Step 3
Press the [ENTER] key to confirm the
"Utility" menu and shift to the next
level.
Step 4
Bring up the "Fill" item by
pressing either [Menu Up] key or
[Menu Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to select to "No" or "Yes".
Step 6
Press the [ENTER] key to confirm
the cleaning cycle.
Plot OK
*Menu* Command>
*Menu* Ut i l i t y>
Fill: Yes
Fill: No
ErrorDisplay:Of f
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 157