User`s guide

Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Utility" menu by pressing
the [Menu Up] key or [Menu Down]
key.
Step 3
Press the [ENTER] key to confirm the
"Utility" menu and shift to the next
level.
Step 4
Bring up the "Wash" item by
pressing the [Menu Up] key or [Menu
Down] key.
Step 5
Select "Yes" by pressing the [Menu
Up] key or [Menu Down] key.
Step 6
Press the [ENTER] key to confirm
"Wash".
Step 7
Remove the currently installed waste
box and insert a new waste liquid box
from the cleaning set.
Step 8
Select "Yes" by pressing the [Menu
Up] key or [Menu Down] key.
Step 9
Press the [ENTER] key to confirm
waste box replaced.
Utility Settings: Wash
Plot OK
*Menu* Command>
*Menu* Ut i l i t y>
ErrorDisplay:Of f
Wash: No
Wash: Yes
Change Waste Ink
ChangeTank? No
ChangeTank? Yes
How to Set Parameters
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 153