User`s guide

Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Function" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Function" menu and shift to the next
level
Step 4
Bring up the "Ink Density" item by
pressing
the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to set the density to "Normal" or "Micro".
Step 6
Press the [ENTER] key to confirm "Ink
Density" shift to the next item to be
set.
Step 7
If no other items are to be changed,
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Function Settings: Ink Density
Plot OK
*Menu* Command>
*Menu* Func t i on>
InkDryTime: 30s
Dist.Adj: No
Plot OK
*Menu* Func t i on>
InkDensi tyNormal
InkDensity: Micro
132 Falcon Outdoor 46/62 USER GUIDE (AP-75046)