User`s guide

Rockhopper II series printers – User’s Guide
98
AP-75095, Rev. 2.1, 18/08/2005
5.4.42. Online time out menu
To set time from the moment of receiving termination of printing data sent by computer to the recognition of
end of printing data.
* OnlineTimer *
OFF – 800sec +
← F2
30sec -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
OnlineTimer OFF/2sec. - <30sec.> -800sec. To change the Online time out time by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous hierarchy menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.43. Overwrite menu
To set the printing method for areas where figures overlap on the printing data.
* Overwrite *
F1 →
Last Mix
← F2
Current parameter →
- Last - (1/1)
Setup items
Parameters Description
<Last> The colour of the print created afterward is given
priority.
Mix The colours of overlapping areas are mixed and
printed.
Overwrite
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’