User`s guide

Rockhopper II series printers – User’s Guide
97
AP-75095, Rev. 2.1, 18/08/2005
5.4.40. Terminator menu
To set the functions for when printing is complete for printer commands included in printing data.
* Terminator *
F1 →
Normal Special
← F2
Current parameter →
- Normal - (1/1)
Setup items
Parameters Description
Normal This is used only for printer command functions.
<Special> The SP0 ;( SP ;) command is recognized as the end
of the data.
Terminator
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.41. Image resolution menu
To set resolution for image data for printing.
* Resolu. *
F1 →
360dpi 600dpi
← F2
F3 →
720dpi 1080dpi
← F4
Current parameter →
- 360dpi - (1/2)
* Resolu. *
F1 →
1200dpi 1440dpi
← F2
F3 →
2160dpi 2880dpi
← F4
Current parameter →
- 360dpi - (2/2)
Setup items
Parameters Description
<360dpi>
600dpi
720dpi
Image resolution
(1/2)
1080dpi
1200dpi
1440dpi
2160dpi
Image resolution
(2/2)
2880dpi
Makes settings for image resolution while printing
with image data.
Image resolution
(1/2-2/2)
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’