User`s guide

Rockhopper II series printers – User’s Guide
95
AP-75095, Rev. 2.1, 18/08/2005
5.4.36. Command setup menu
To perform various settings for printer commands.
* Command *
F1 →
Command Step
← F2
F3 →
Position Terminator
← F4
(1/2)
* Command *
F1 →
Resolu. OnlineTimer
← F2
F3 →
Overwrite Halftone
← F4
(2/2)
Setup items
Parameters Description
Command To make the settings for the conditions of printer
commands sent from the computer to the product.
Refer to ‘Command select menu’
Step To set the units for amount of movement for printing.
Refer to ‘Print step menu’
Position To set the initial writing position for printing.
Refer to ‘Print position menu’
Command setup
(1/2)
Terminator To set the functions for when printing has been
completed for printer commands included in printing
data.
Refer to ‘Terminator menu’
ImageResolu Makes settings for image resolution while printing
with image data.
Refer to ‘Image resolution menu’
OnlineTimer Makes settings for the time between the end of
receiving printing data from a computer and
recognizing the end of printing data.
Refer to ‘Online time out menu’
Overwrite Sets the printing method for areas where figures
overlap on the printing data.
Refer to ‘Overwrite menu’
Command setup
(2/2)
Halftone When creating prints of MH-GL/GL2 (vector) data
and RTLPASS (raster) data that have not been
converted into binary, set the gradation sequence
representation method.
Refer to ‘Halftone menu’
Command setup
(1/2-2/2)
- [CANCEL] key: to shift to the previous hierarchy
menu.
Refer to ‘Setup menu’