User`s guide

Rockhopper II series printers – User’s Guide
94
AP-75095, Rev. 2.1, 18/08/2005
5.4.33. Repeat times menu
To set the number of repeats per line of printing.
* Count *
1 cnt – 99 cnt +
← F2
1 cnt -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
Times <Once> to 99 times To change repeat times by operating the following
keys:
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: To confirm the setup value, to shift to
the previous hierarchy menu.
• [CANCEL] key: To cancel setup value, to shift to the
previous hierarchy menu.
Refer to ‘Repeat printing menu’
5.4.34. Interval time menu
To set interval time for the repeat print.
* IntervalTime *
0.0 sec – 5.0 sec +
← F2
0.0 sec -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
Interval <0.0 sec.> to 0.1 to 5.0 sec. To change interval time by operating the following
keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shift to the
previous hierarchy menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous hierarchy menu.
Refer to ‘To repeat the printing menu’
5.4.35. Head speed menu
To set the head speed
* HeadSpeed *
F1 →
Normal Fine
← F2
-Normal- (1/1)
Setup items
Parameters Description
Normal Print at normal speed
Fine Print at half speed.
HeadSpeed
- [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’