User`s guide

Rockhopper II series printers – User’s Guide
93
AP-75095, Rev. 2.1, 18/08/2005
5.4.30. InterLace Setup menu
To set the over printing method (interlace method) for printing.
* Interlace *
F1 →
1pass 1passFew
← F2
F3 →
2pass 4pass
← F4
Current parameter →
- 1pass - (1/1)
Setup items
Parameters Description
1 pass Over printing is not performed.
1 pass Few Only gaps between lines are overwritten.
2 pass Over-printing is performed twice per 1 line.
4 pass Over-printing is performed four times per 1 line.
Interlace method
- [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.31. Printing direction menu
To set print head moving direction for printing.
* Direction *
F1 →
UniDir. BiDir.
← F2
Current parameter →
- BiDir. - (1/1)
Setup items
Parameters Description
UniDir Prints in one direction.
BiDir Prints bi-directionally.
Direction
- [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.32. Repeat printing menu
To make settings for the repeat print.
* RepeatPrn *
F1 →
Count IntervalTime
← F2
(1/1)
Setup items
Parameters Description
Times To set the number of repeats per line of printing.
Refer to ‘Repeat times menu’
Interval To set interval time for the repeat print.
Refer to ‘Interval time menu’
Repeat
- [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’