User`s guide

Rockhopper II series printers – User’s Guide
88
AP-75095, Rev. 2.1, 18/08/2005
Print2 Performs printing by media feed compensation (for fine adjustment).
A correction pattern with a width of ± 0.02% (in steps of 0.01%) is
printed around the center of the correction value currently set.
Refer to ‘Printing by Media feed compensation menu’
- [CANCEL] key: Shifts to the previous hierarchy menu.
Refer to ‘User media menu’
5.4.20. Change media feed compensation value menu
Changes the media feed compensation value.
* Change *
90.00% - 110.00% +
← F2
110.00% -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
Change 90.00%-<100.00%>-110.00% Changes the media feed compensation value by
operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease setup value.
• [ENTER] key: Confirm setup value, shift to the
previous hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the
previous hierarchy menu.
Refer to ‘Media feed compensation menu’
5.4.21. Printing by Media feed compensation menu
Performs printing by media feed compensation.
* Dist. Adj *
Printing
→ CANCEL
Setup items
Parameters Description
Data printing Now printing by media feed compensation. Wait for a
while until printing has been finished.
Dist.Adj
- • [CANCEL] key: to perform following operations :
• Media feed correction printing has been finished.
• to eject media.
• to shift to the previous hierarchy menu.
Refer to ‘Media feed compensation menu’