User`s guide

Rockhopper II series printers – User’s Guide

AP-75095, Rev. 2.1, 18/08/2005

5.4.18. HStatus menu Rockhopper II 4H

Check the temperature of the heating elements.

Notes :

Please note that this heating element is only available onto the Rockhopper II 4H series

printer.

* HStatus *

A: 49 B: 26 C: 27 D : 49

Heating NOT Ready

Notes :

A stands for the Heater.

B stands for the Fixer.

C stands for the Post Fixer.

D stands for the Dryer.

Press the [CANCEL] key to go to the previous menu.

5.4.19. Media feed compensation menu

To perform various settings for media feed compensation

Notes :

• For details of the media feed compensation, refer to "Media feed compensation".

* Dist. Adj *

F1 →

Print 1 Change

← F2

F3 →

Print 2

(1/1)

Setup items

Parameters Description

Print1 Performs printing by media feed compensation.

A correction pattern with a width of ± 0.20% (in steps of 0.10 %) is

printed around the center of the correction value currently set.

Refer to ‘Printing by Media feed compensation menu’

Dist.Adj

Change Changes the media feed compensation value.

The menu changes to the Change Media Feed Correction Value menu.

Refer to ‘Change media feed compensation value menu’