User`s guide

Rockhopper II series printers – User’s Guide

AP-75095, Rev. 2.1, 18/08/2005

5.4.14. Drier menu

Set the temperature of the Drier.

* Drier (D) *

OFF – 50°C +

← F2

50°C -

← F4

F2, F4

→ ENTER

Use the [F2] or [F4] key to select the requested temperature for the Drier.

Notes :

• The default setting for the drier is set to ‘50°C’.

• The function of the drier (D) : Heating the printed transfer paper evaporates the

water fast enough so that the print is touch-dry when wound.

Caution :

• We recommend you to set the dryer temperature at 50°C. This to be sure that

transfer paper is touch-dry when wound.

5.4.15. Fixer menu

Set the temperature of the Fixer.

Notes :

Please note that this heating element is only available onto the Rockhopper II 4H series

printer.

* Fixer (B) *

OFF – 70°C +

← F2

70°C -

← F4

F2, F4

→ ENTER

Use the [F2] or [F4] key to select the requested temperature for the Fixer.