User`s guide

Rockhopper II series printers – User’s Guide
82
AP-75095, Rev. 2.1, 18/08/2005
5.4.8. Thin Out: Ink amount menu
Sets the amount of ink discharged while printing, according to the media type.
* ThinOut *
50% - 100% +
← F2
100% -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
Amount of ink 50 %-< 100%> Use the following keys to change the amount of ink.
• [F2] key: Increases the setting value.
• [F4] key: Reduces the setting value.
• [ENTER] key: Sets the setting value, and moves the
screen to the menu of the previous hierarchy.
• [CANCEL] key: Cancels the setting value, and
moves the screen to the menu of the previous
hierarchy.
Refer to ‘User media menu’
5.4.9. InkDry menu
Sets the waiting period between the end of operation and the start of next printing in order to let the printed
media dry.
* InkDryTime *
0 sec – 60 min +
← F2
30 sec -
← F4
F2, F4
→ ENTER
Setup items
Parameters Description
InkDryTime 0 to <30 sec. > to 270 sec. to
60 min.
To change the InkDryTime by operating the following
keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous hierarchy menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous hierarchy menu.
Refer to ‘User media menu’