User`s guide

Rockhopper II series printers – User’s Guide
81
AP-75095, Rev. 2.1, 18/08/2005
5.4.7.2. User media menu Rockhopper II 4H
* User 1 *
F1 →
ThinOut InkDryTime
← F2
F3 →
HeadHeight Stiff
← F4
(1/3)
* User 1 *
F1 →
Thick Heater
← F2
F3 →
Drier Fixer
← F4
(2/3)
* User 1 *
F1 →
Post Fixer HStatus
← F2
F3 →
Dist. Adj
(3/3)
Setup items
Parameters Description
Amount of ink Sets the amount of ink discharged while printing according
to the media type. → Refer to ‘Ink amount menu’
InkDryTime In order to let the ink for the printing dry, the time between
the end of the print and the beginning of the next print is set.
→ Refer to ‘InkDry menu’
HeadHeight Sets the distance (head height) between the print head and
the media. → Refer to ‘Head Height menu’
User media 1-8
(1/3)
Stiff Makes the setting for the absorbing power of the media to
the printing board depending on the hardness of the media.
→ Refer to ‘Stiff menu’
Thickness
Makes the setting on the width of the media to be used. →
Refer to ‘Thickness menu’
Heater
Sets the temperature of the Heater. → Refer to ‘Heater
Menu’
Drier
Sets the temperature of the Drier. → Refer to ‘Drier Menu’
User media 1-8
(2/3)
Fixer
Sets the temperature of the Drier. → Refer to ‘Fixer Menu’
Post Fixer
Sets the temperature of the Drier. → Refer to ‘Post Fixer
Menu’
HStatus
Checks the temperature of heating elements. → Refer to
‘HStatus Menu’
User media 1-8
(3/3)
Dist.Adj
Performs various settings for media feed compensation. →
Refer to ‘Media feed compensation menu’