User`s guide

Rockhopper II series printers – User’s Guide
79
AP-75095, Rev. 2.1, 18/08/2005
5.4.5. Media setup menu
Perform various settings for media.
* MediaSet *
F1 →
Media CutSize
← F2
F3 →
TopFeed MediaCut
← F4
(1/1)
Setup items
Parameters Description
Type Sets the media type used for test printing.
Refer to ‘Media type menu’
Cut size To set the method for detecting the size of the media
when sheet media has been loaded.
Refer to ‘Cut size menu’
Top feed Sets the amount of media to be fed when printing
begins. Make this setting when using roll media.
Refer to ‘Top feed menu’
Media cutting The method of cutting the media after printing is set
here.
Refer to ‘Media cut menu’
Media setting
- [CANCEL] key: to shift to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.6. Media type menu
Set media type for printing.
* SetupMenu *
F1 →
User 1 User 2
← F2
F3 →
User 3 User 4
← F4
(1/2)
* SetupMenu *
F1 →
User 5 User 6
← F2
F3 →
User 7 User 8
← F4
(2/2)
Setup items
Parameters Description
User media 1
User media 2
User media 3
Types (1/2)
User media 4
User media 5
User media 6
User media 7
Types (2/2)
User media 8
To set the type of media used for printing.
For setup values of printing operation, eight settings
of "user media 1-8" can be set.
Refer to ‘User media menu’
Type (1/2-2/2) - [CANCEL] key: to shift to the previous hierarchy
menu.
Refer to ‘Media setup menu’