User`s guide

Rockhopper II series printers – User’s Guide
77
AP-75095, Rev. 2.1, 18/08/2005
5.4.3. Origin setup menu
Sets the printing start position (origin) for printing data.
Set this when you want to re-print to blank area of the printed media by changing the layout of the printing
data.
* Origin *
F1 →
Forward Left
← F2
F3 →
Back Right
← F4
Parameter →
L : 00500.0 W : 01000.0
Setup items
Parameters Description
• L: Media feed value
• W: Print head movement
value
(Unit: mm)
Changes the print head position and media feed
amount by operating the following keys.
• [F1] key: Feeds media forward.
• [F2] key: Moves the print head to the left.
• [F3] key: Feeds media backward.
• [F4] key: Moves the print head to the right.
• [ENTER] key: Determines the setup values then
returns to the previous hierarchical menu. Refer to
‘Setup menu’
Origin setting
- [CANCEL] key: shifts to the previous hierarchy menu.
Refer to ‘Setup menu’
Notes :
• When printing from the data on the hard disk, the printing will start from the same
start position as when the printing data was written, regardless of the home position
setting value.
Notes :
• The origin setup menu automatically ends without pressing any key for a certain
period, to avoid drying the print head.