User`s guide

Rockhopper II series printers – User’s Guide
75
AP-75095, Rev. 2.1, 18/08/2005
Setup items
Parameters Description
Ink status Displays the information (ink status) for each ink
cassette installed in the ink cassette slot.
Refer to ‘Ink status menu’
Origin setting Sets the printing start position (origin) for printing
data.
Refer to ‘Origin setup menu’
Test print Performs test printing.
Refer to ‘Test print menu’
Setup menu (1/7)
Media setting Makes various media settings.
Refer to ‘Media setup menu’
Print mode setting Makes various print mode settings.
Refer to ‘Printing mode menu’
Command setting Makes various printer commands settings.
Refer to ‘Command setup menu’
Layout setting Makes various layout function settings.
Refer to ‘Layout setup menu’
Setup menu (2/7)
Function setting Makes various processing printing data settings.
Refer to ‘Function setup menu’
Roll media setting Makes various roll media settings.
Refer to ‘Roll Media setup menu’
Centronics setting Sets Centronics Interface communication mode.
Refer to ‘Centronics menu’
Setup menu (3/7)
Network setting Makes the settings for the network interface.
Refer to ‘Network setting menu’
Utility setting Makes various advanced function settings.
Refer to ‘Utility menu’
File management setting Makes various settings for the processing method of
the printing data sent from computer to the installed
hard disk in the printer.
Refer to ‘File management setup menu’
Setup menu (4/7)
Initialize setting Returns the parameters to factory default value.
Refer to ‘Initialize setup menu’
Data dump The dump printing for the online feature check will be
performed.
Refer to ‘Data dump menu’
Setup menu (5/7)
Ink Manager Perform ‘HeadWash’, ‘InkChange’ or ‘InkLoad’.
Refer to ‘Ink Manager menu’
Cutting blade replacement The cutting blade is replaced.
Refer to ‘Cutter change menu’
Wiper cleaning Clean the wiper.
Refer to ‘Wiper clean menu’
Tank replacement Tank is replaced.
Refer to ‘Tank change menu’
Setup menu (6/7)
Tubing Flush Makes various tubing flush settings
Refer to ‘Tubing flush menu”
Setup menu (7/7)
Version Check Ability to view the installed firmware version.
Refer to ‘Version Check’
Setup menu (1/7-
7/7)
- [CANCEL] key: Cancel the setup menu, and shift to
the normal condition.
Notes :
• By using the software server RIP (option), some setups for printing can be set by
the RIP. For details, refer to the operation manual of the products.