User`s guide

Rockhopper II series printers – User’s Guide
57
AP-75095, Rev. 2.1, 18/08/2005
1. Front cover
Step 10 : The media initial menu is displayed on the operation panel.
Notes :
• To change the media type, follow the directions in "Setting media type".
* PaperInitialMenu *
Roll
← F2
F3 →
LeverUp User1
← F4
F2, F4 → ENTER or F3
4.6.2. Loading roll media
To load roll media, please follow the instructions in the User’s Guide “Handling roll media on a Falcon II
series printer and Rockhopper II series printer”.
Notes :
• Depending on the kind of system installed on your printer, loading media is
different.
4.6.3. Setting media type
The procedure for setting media type is explained below.
To set the media type, follow the steps below.
Step 1 : Turn the printer on and load the media.
¾ Once the media has been set, the media initial menu will be displayed.