User`s guide

Rockhopper II series printers – User’s Guide
50
AP-75095, Rev. 2.1, 18/08/2005
Notes :
• When the operation panel is in the following condition, the power is ON. Press the
key again to turn the power OFF.
o The POWER lamp is lit (green).
Step 3 : Following message is displayed for 3 seconds on the operation panel.
Notes :
• If pressing the [POWER] key on the operation panel by mistake, press the
[POWER] key again while the following message is displayed.
Power OFF
Step 4 : The product will perform the power OFF operation.
¾ Following message is displayed on the operation panel.
Power OFF
Please Wait
¾ All lamps and the LCD of the operation panel will turn OFF.
¾ The product will automatically turn the power OFF.
Notes :
• If there are problems during the power OFF operation, the unit will display a
message on the operation panel, and the operation may stop. If the operation
stops, refer to “Troubleshooting” and take the appropriate actions.