User`s guide

Rockhopper II series printers – User’s Guide
44
AP-75095, Rev. 2.1, 18/08/2005
3.5.1.2. Required space
Install the product on a flat surface that fulfills the following conditions.
Notes :
• Refer to “Product Specifications” of the User's Guide for the information of the
product.
a=1000mm b=1000mm c=2500mm d=600mm e=1250mm
3.5.2. Installing the printer
To install the product, follow the steps below.
Step 1 : Move the product to where it will be installed.
Step 2 : Lock the casters.
Step 3 : Rotate the four adjusters in the direction shown in the figure to make the printer stable.
Step 4 : Jiggle the printer to make sure that it stable.
Step 5 :
1. Adjuster 2. Caster