User`s guide

Rockhopper II series printers – User’s Guide

AP-75095, Rev. 2.1, 18/08/2005

B ) : Remove the two wing bolts.

C ) : Remove the head unit fixture material.

1. Wing bolt 2. Head unit fixture material

D ) : Close the front cover.

1. Front cover

Step 4 : Removal of protective packaging material is completed.

3.3.5. Installing accessories

To install accessories, such scroller receivers, take-up system, roll-off/roll-up system and waste fluid tank,

please refer to the User’s Guide “Handling roll media on a Falcon II series printer and Rockhopper II series

printer”.

Caution :

• Before powering ON the unit, make sure the waste bottle is installed.