User`s guide

Rockhopper II series printers – User’s Guide

AP-75095, Rev. 2.1, 18/08/2005

3.3.4. Removal of protective packaging material

Protective packaging material is attached on following locations of this product.

Remove all protective packaging material according to the following procedure.

Step 1 : Remove tape from all parts of the product.

Step 2 : Remove the two anti-rubbing materials on the top of the main unit.

1. Anti-rubbing material

Step 3 : Remove the head unit fixture material from inside the front cover according to the following

procedure.

A ) : Open the front cover.

Caution :

Be careful not to pinch your fingers when opening and closing the front cover.

1. Front cover