User`s guide

Rockhopper II series printers – User’s Guide

AP-75095, Rev. 2.1, 18/08/2005

3.3.2. Installing the stand

Install the stand to the main unit according to the following procedure.

Step 1 : Place the stand with its feet on the floor.

Step 2 : Lift up the main unit with at least four persons by holding it by the handles.

Step 3 : Place the main unit on the stand.

1. Stand 2. Main unit

3. Handle

Step 4 : Attach the hexagon socket head cap screws (M6 x 16: 8) to the stand.

Step 5 : Tighten the hexagon socket head cap screws to install the stand using the assembly tool.

1. Hexagon socket head cap screw (M6 x 16) 2. Stand

3. Main unit

Step 6 : Installing the stand has been completed.