User`s guide

Rockhopper II series printers – User’s Guide
32
AP-75095, Rev. 2.1, 18/08/2005
Step 4 : Remove the outer boards and take out the accessory box and the packaging box of the waste
fluid tank.
1. Outer board 2. Accessory box
3. Packaging box of the waste fluid tank
3.1.2. Unpacking stand packaging box
Unpack the package of the stand according to the following procedure.
Step 1 : Move the packaging of the stand to the location to unpack.
Step 2 : Open the package and take out the foot, stay and the four packaging materials.
1. Stay 2. Foot
3. Packaging material