User`s guide

Rockhopper II series printers – User’s Guide
28
AP-75095, Rev. 2.1, 18/08/2005
2.4. PRINTER STATUS
The status of the printer is explained below.
2.4.1. Normal
Indicates that the printer can draw print data when media is loaded.
You can also make settings concerning printing using the operation panel.
The contents displayed on the LCD monitor of the operation panel is as follows.
1 →
Ready to print
2 →
Heaters Cleaning
← 3
4 →
Cut&Feed Lever Up
← 5
6 →
User 1 xxxm
← 7
No. Position Description
1 1st line Displays the current status of the printer. Depending on the status, the
contents may be displayed in 2 to 4 lines.
2 Left of 2nd line Displays the function assigned to [F1] key.
3 Right of 2nd line Displays the function assigned to [F2] key.
4 Left of 3rd line Displays the function assigned to [F3] key.
5 Right of 3rd line Displays the function assigned to [F4] key.
6 Left of 4th line Displays the currently set media type.
7 Right of 4th line Displays the approximate amount of remaining media that is currently
set. (Units: m)
However, the amount is displayed only when either "Roll media 1",
"Roll media 2", or "Roll media 3" is selected in the Roll media setting
menu.
2.4.2. Setting menu display
Indicates that you can make settings concerning printing using the operation panel.
Operation regarding printing is possible via the operation panel.
The contents displayed on the LCD monitor of the operation panel is as follows.
1 →
* SetupMenu *
2 →
InkStatus OriginSet
← 3
4 →
TestPrint MediaSet
← 5
(1/7)
← 6
No. Position Description
1 1st line Displays the setting menu name currently set.
2 Left of 2nd line Displays the function assigned to [F1] key.
3 Right of 2nd line Displays the function assigned to [F2] key.
4 Left of 3rd line Displays the function assigned to [F3] key.
5 Right of 3rd line Displays the function assigned to [F4] key.
6 4th line Displays the currently available functions of the [F1] key to the [F4]
key.
Displays the page status if there are multiple pages for the currently
displayed setting menu.