User`s guide

Rockhopper II series printers – User’s Guide
176
AP-75095, Rev. 2.1, 18/08/2005
Notes :
¾ When removing the wiper assembly, be careful not to break the sensor positioned
below the wiper assembly.
1 = sensor
Step 4 : Remove the wiper arm and re-install the new one.
1 = Wiper arm assembly 2 = T plate
Step 5 : To reinstall the wiper assembly, please reverse the removal procedure.
Step 6 : After complete reinstallation, clean the wipers using isopropanol.