User`s guide

Rockhopper II series printers – User’s Guide
172
AP-75095, Rev. 2.1, 18/08/2005
7.6. PERIODICAL SERVICES
This section describes the periodical services required for this machine.
The periodical services ensure stable printout quality of the machine.
In the periodical services, some service parts may be checked, cleaned, or replaced.
Caution :
There are two parts of periodical service, namely the parts that can be replaced by the
end-user and the parts that need to be done by authorized Mutoh technicians.
7.6.1. Service by end-user
Perform periodical inspections according to the table below.
N° Part number Quantity Action
1 ME-80771 4 Change wipers
2 DF-43694 + DE-35399 2 + 1 Change sponge at back op capping station
3 / / Clean wipers
4 / / Clean caps in maintenance station
5 / / Clean around bottom of heads (not nozzle plate)
6 AP-51600 1 Change sponge in wiper arm
Month Maintenance
Cycle
1 2 3 4 5 6 7 8 9 10 11 12
1
x x
2
x x x x
3
4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x
4
4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x
5
4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x 4x
6
x x x x
7.6.2. Service by authorised Mutoh technician
Perform periodical inspections according to the table below.
N° Part number Quantity Action
1 MY-42110 16 Replace the dampers.
2 MY-80300 4 Replace the pumps.
3 ME-18280 8 x 0.8 m Replace the tubing from the pumps to the waste
bottle
4 MY-35085 + ME-80385 + ME-60014 1+ 1 m +1 Replace the right spitting box + tube + L
connection
5 KY-80627 1 Replace the capping station.
6 / / Apply grease on head up-down cams if needed.
7 / / Apply grease on Y-motor belt if needed.
8 / / Apply grease on roller path carriage if needed.
9 / / Apply grease on capping station camm + gears if
needed.
10 / / Clean the maintenance station area.
11 / / Remove dust in fan area underneath print
platform.