User`s guide

Rockhopper II series printers – User’s Guide
171
AP-75095, Rev. 2.1, 18/08/2005
(2) After the transfer
Follow the steps below to prepare the printer to be used after the transfer.
Step 1 : Make sure that you place the printer on an adequate place.
Step 2 : Lock the casters after transferring the printer.
Notes :
• For connecting cables, refer to the following.
→ Connecting the power cable
→ Connecting the printer to your PC
Step 3 : Connect the power cable and other cables.
Notes :
• For connecting cables, refer to the following.
→ Connecting the power cable
→ Connecting the printer to your PC
Step 4 : Perform a nozzle check to check if the printer head has clogged.
Notes :
• To perform the nozzle check, refer to "NozzleCheck".
Step 5 : Perform a fine adjustment of image quality.
Notes :
• To perform an adjustment of image quality, refer to "Alignment".
7.5.2. Transporting the printer
When you transport the printer, the printer should be repacked in the original box and packing materials, to
protect it from vibration or impact.
Notes :
• When you transport the printer, contact your local MUTOH dealer for assistance.