User`s guide

Rockhopper II series printers – User’s Guide
169
AP-75095, Rev. 2.1, 18/08/2005
Step 2 : Follow "Menu setup on the operation panel" and display the Ink Manager menu.
* Ink Manager *
HeadWash
InkLoad InkChange
← F4
(1/1)
Step 3 : Press the [F4] key to select ‘Ink Change’.
* InkChange *
F1 →
No Yes
← F2
(1/1)
Step 4 : Select "YES" and press the [F2] key on the operation panel.
¾ Head Cleaning starts.
¾ The following information is displayed on the operation panel.
Notes :
• To not perform an ink change.
• Press the [CANCEL] key on the operation panel.
• Select "NO" and press the [F1] key on the operation panel.
The process consists of several cleaning loadings, several air loadings and one ink loading. On
the display of the operation panel a time indication is mentioned on the fourth line.
Message Time 50” Time 64” Time 87”
Please remove cart. (*)
Ink Discharge (*) 1 1 1
Please insert Cleaning cart (*)
During washing wait for a while (*) 5 5 10
Remove cassettes
During washing wait for a while 6 6 7
Please insert ink cart.
Ink refill 8 8 8
The end
(*) = This will be asked 7 times.
Step 5 : The change of ink types has been completed.