User`s guide

Rockhopper II series printers – User’s Guide
168
AP-75095, Rev. 2.1, 18/08/2005
7.4. CHANGING INK TYPES
This chapter explains the procedures to change ink types.
Follow the procedures below to change the ink types for printing.
Caution :
• Insure that the ink does not get in your eyes or touches your skin when handling
the ink cassette. If the ink gets in your eyes or touches your skin, wash it in
running water. Otherwise, it may cause a bloodshot eye or minor inflammation.
If any of those symptoms are seen, consult a doctor immediately.
• Do not disassemble the ink cassette. This may cause the ink to get in the eyes
or touch the skin.
• Only use Eco-Solvent Plus ink and appropriate cleaning liquid. Using other ink
(e.g. dye or pigment) could cause permanent damage to the printer.
Notes :
• Do not shake the ink cassette. The ink may leak from the cassette.
• Do not disassemble the ink cassette. The disassembled ink cassette is no
longer usable.
• Refer to the price list for the ink type and other details of the ink cassette.
Price List
• Use only Mutoh recommended ink cassettes.
This printer is adjusted under the condition of using only the recommended
Mutoh ink cassettes. Using other types of ink cassette may cause:
• Faint printing or the ink cannot be properly detected.
• The warranty will not cover (repairs will require a fee) a breakdown.
Notes :
• Refer to "Operating from the operation panel" for the key operation for the
setting menu.
• Refer to "Replacing ink cassettes" for the procedures to load and unload the ink
cassette.
Step 1 : Check the following when the power of the printer is ON.
¾ The printer is not printing.
¾ The operation panel is in normal status.
¾ The media setting light on the operation panel is OFF.