User`s guide

Rockhopper II series printers – User’s Guide
167
AP-75095, Rev. 2.1, 18/08/2005
Caution :
• Do not touch the cleaning wiper or the head cap unit while cleaning the cleaning
wiper. Doing so may result in poor head cleaning because of oil on your hands.
Step 9 : Use the cloth dampened with cleaning liquid to wipe off ink on the cleaning wiper.
1. Cleaning wiper 2. Cleaning cloth
3. Head cap unit
Step 10 : Reinstall the carriage cover following steps 5 to 8 in reverse order.
Notes :
• When using this product, the carriage cover must be installed.
Step 11 : Press the [ENTER] key on the operation panel.
¾
¾¾
¾ The carriage moves to the cap position. The printer returns to menu 6/7.
* SetupMenu *
F1 →
CutterChg. WiperClean
← F2
F3 →
TankChg. TubingFlush
← F4
(6/7)
¾
¾¾
¾ The printer returns to the normal status after pressing the [CANCEL] key
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
User1 xxxm
Step 12 : Cleaning the wiper has been finished.