User`s guide

Rockhopper II series printers – User’s Guide
164
AP-75095, Rev. 2.1, 18/08/2005
Step 7 : Press the [ENTER] key on the operation panel to start the head cleaning.
Notes :
• If the [Cancel] key has been pressed instead of the [ENTER] key after changing
the parameters, the printer returns to the normal status without performing a
head cleaning.
Cleaning
Rest ** min
Step 8 : When the head cleaning has been completed, the printer returns to the normal status.
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
User1 xxxm
Step 9 : Perform a nozzle check again and check the print head.