User`s guide

Rockhopper II series printers – User’s Guide
161
AP-75095, Rev. 2.1, 18/08/2005
7.3. CLEANING
You need to clean the printer periodically to keep it in best working condition.
Warning:
•
Do not insert or drop metal or inflammable objects into openings, such as
ventilation outlets. Doing so may result in electrical shock and fire.
• Stop using your printer if a liquid is spilled into it. This may cause
electrical shock or fire. Power the printer OFF as soon as possible, unplug
the power cord and then contact your local MUTOH dealer.
Caution:
• Be sure to power OFF the printer and unplug the power cable from the outlet
before cleaning the printer.
• Do not use thinner, benzene, alcohol or other active agents. Doing so may
result in damage or paint peeling from the casing.
• Be careful not to spill water inside the printer. Doing so may result in a short
circuit.
• Never open the covers fixed with screws. Doing so may result in electrical
shock or malfunctioning of the printer.
Following are instructions for cleaning the printer.
7.3.1. Cleaning the outer case
(1) Cleaning frequency
Clean once a month.
(2) Cleaning procedure
Remove dust or smudges on the outer case with a soft cloth.