User`s guide

Rockhopper II series printers – User’s Guide
160
AP-75095, Rev. 2.1, 18/08/2005
Step 4 : Remove the waste liquid tank from the tank tray of the stand.
Notes :
• Put the used waste liquid tank in a plastic bag and follow the local regulations
when disposing.
Step 5 : Open the cap of a new waste liquid tank and put the tank to the printer.
Step 6 : Press the [ENTER] key on the operation panel.
• The printer returns to menu 6/7.
* SetupMenu *
F1 →
CutterChg. WiperClean
← F2
F3 →
TankChg. TubingFlush
← F4
(6/7)
• The printer returns to the normal status by pressing the [CANCEL] key
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
User1 xxxm
The replacement of the waste liquid tank has been completed.