User`s guide

Rockhopper II series printers – User’s Guide
158
AP-75095, Rev. 2.1, 18/08/2005
1. Cutting blade holder lever 2. Cutting blade holder
Step 9 : Close the front cover.
1. Front cover
Step 10 : Press the [ENTER] key on the operation panel.
¾ The carriage returns to its original position and returns to menu 6/7.
* SetupMenu *
F1 →
CutterChg. WiperClean
← F2
F3 →
TankChg. TubingFlush
← F4
(6/7)
¾ The printer returns to the normal status when pressing the [CANCEL] key.
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
User1 xxm
Step 11 : Cutting blade replacement has been finished.