User`s guide

Rockhopper II series printers – User’s Guide
151
AP-75095, Rev. 2.1, 18/08/2005
7. DAILY MAINTENANCE
7.1. INTRODUCTION
This chapter explains daily maintenance of the printer.
7.2. REPLACING CONSUMABLES
This section explains when to replace ink cassettes, roll media, or the cutting blade and the procedures for
replacement.
7.2.1. Replacing ink cassettes
Read the following for information on when and how to replace ink cassettes.
(1) Replacement time
Replace ink cassettes under the following conditions.
a. The ink remaining in the ink cassette is low.
• The following message is displayed on the operation panel.
• Printing operation is continued.
• Prepare new ink cassettes before they are totally empty.
Ready to Print
Heaters Cleaning
Cut&Feed LeverUp
→
NearEnd [1]
b. The ink cassette becomes empty.
• The following message is displayed on the operation panel.
• Printing operation stops.
• Replace with a new ink cassette as soon as possible.
InkStatus
No Ink [123]
Notes :
• When the ink runs out or is low, the ink colour is indicated as follows:
• 1-8: The number of the ink cassette slot (Refer to ‘Installing ink cassettes’)
• All: All inks