User`s guide

Rockhopper II series printers – User’s Guide
133
AP-75095, Rev. 2.1, 18/08/2005
Notes :
• You can also switch the up and down movement of the pressure rollers using the foot
switch instead of the operation panel.
1. Foot switch
5.5.5. Print mode check
Use the following procedure to check the print mode currently set.
Step 1 : Press the [ENTER] key on the operation panel.
¾ The following information is displayed on the operation panel for three seconds.
* Printmode *
1 →
Condition 360x360
2 →
Interlace 1pass
3 →
Direction UniDir
No. Position Description Reference
1 Line 2 The printing quality is displayed. Refer to ‘Printing quality menu’
2 Line 3 The interlace method is displayed. Refer to ‘InterLace Setup menu’
3 Line 4 The printing direction is displayed. Refer to ‘Printing direction menu’
Step 2 : When the printing mode display closes, the product changes to its normal status.