User`s guide

Rockhopper II series printers – User’s Guide
125
AP-75095, Rev. 2.1, 18/08/2005
5.4.95. Tank change menu
To change the waste fluid tank.
Set when changing the waste fluid tank.
Notes :
• Refer to "Replacing the waste liquid tank" for details regarding the procedure for
changing the waste fluid tank.
Changed wasted ink tank?
ENTER or CANCEL
Setup items
Parameters Description
Cancel Do not change the tank.
To shift to the previous hierarchy menu.
Refer to ‘Setup menu’
Enter When tank has been changed.
Tank change
- •[CANCEL] key: shifts to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.96. Tubing Flush menu
To remove rest fluids out of the capping station and waste tubes, a new menu option was added.
Important :
¾ The tubing flush sequence will not remove fluids out of the head nor out of the
ink supply tubes.
The tubing flush feature includes following sequence:
1) The head is moved away from the capping position.
2) Pump sequence is started.
3) Pumps are stopped and head is re-capped.
The tubing flush can be started via the “TubingFlush” menu.
*SetupMenu*
CutterChg. WiperClean
TankChg. TubingFlush
(6/7)
•
Tubing flush for 4 head printer.
*TubingFlush*
Head 1 – 2