User`s guide

Rockhopper II series printers – User’s Guide
124
AP-75095, Rev. 2.1, 18/08/2005
5.4.93. Cutter change menu
Makes the setting to replace the cutting blade.
Notes:
• Refer to "Replacing the cutting blade" for details regarding the procedure for
manually changing the cutting blade
* CutterChg. *
F1 →
No Yes
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
No Do not change the cutting blade.
To shift to the previous hierarchy menu.
Refer to ‘Setup menu’
Yes To change the cutting blade.
Cutter change
- • [CANCEL] key: shifts to the previous hierarchy
menu.
Refer to ‘Setup menu’
5.4.94. Wiper clean menu
To clean the cleaning wiper.
Make the setting for cleaning the cleaning wiper.
Notes :
• Refer to "Cleaning the cleaning wiper" for details regarding the procedure for
cleaning the cleaning wiper.
* WiperClean *
F1 →
No Yes
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
No Do not clean the cleaning wiper.
To shift to the previous hierarchy menu.
Refer to ‘Setup menu’
Yes To clean the cleaning wiper.
Wiper clean
- • [CANCEL] key: shifts to the previous hierarchy
menu.
Refer to ‘Setup menu’