User`s guide

Rockhopper II series printers – User’s Guide
123
AP-75095, Rev. 2.1, 18/08/2005
5.4.91. Ink Load menu
To load ink.
* InkLoad *
F1 →
Start Stop
← F2
(1/1)
Setup items
Parameters Description
Start Starts the ink load process of 8 minutes.
Stop Stops the ink load process.
Ink Load
- • [CANCEL] key: shift to the previous hierarchy menu.
Refer to ‘Setup menus’
5.4.92. Ink Change menu
To perform an ink change.
* InkChange *
F1 →
No Yes
← F2
(1/1)
Setup items
Parameters Description
No Do not perform an ink change.
Yes To start the ink change cycle.
Ink Change
- • [CANCEL] key: shift to the previous hierarchy menu.
Refer to ‘Setup menus’
Notes :
• To reduce the consumption of ink and cleaning liquid it is recommended to change
ink types by using the ‘Ink Change’ cycle.
The process consists of several cleaning loadings, several air loadings and one ink loading. On
the display of the operation panel a time indication is mentioned on the fourth line.
Message Time 50” Time 64” Time 87”
Please remove cart. (*)
Ink Discharge (*) 1 1 1
Please insert Cleaning cart (*)
During washing wait for a while (*) 5 5 10
Remove cassettes
During washing wait for a while 6 6 7
Please insert ink cart.
Ink refill 8 8 8
The end
(*) = This will be asked 7 times.