User`s guide

Rockhopper II series printers – User’s Guide
122
AP-75095, Rev. 2.1, 18/08/2005
5.4.89. Ink Manager menu
To perform a ‘Head Wash’, “Ink load’ or ‘Ink Change’.
* Ink Manager *
F1 →
HeadWash
F3 →
InkLoad InkChange
← F4
(1/1)
Setup items
Parameters Description
Head Wash To perform a head cleaning.
Ink Load To load ink.
Ink Change To change ink type.
Ink Manager
- • [CANCEL] key: shift to the previous hierarchy
menu.
Refer to ‘Setup menus’
5.4.90. Head Wash menu
To perform a head wash to remove all ink of the ink supplying system.
* HeadWash *
F1 →
No Yes
← F2
(1/1)
Setup items
Parameters Description
No Do not wash the ink supplying system.
Yes To wash the ink supplying system.
Head clean
- • [CANCEL] key: shift to the previous hierarchy menu.
Refer to ‘Setup menus’
Notes :
• Only after two head wash cycles it is possible to change ink types. Use the ‘Ink
Load‘to load ink.
The process consists of several cleaning loadings, several air loadings and one ink loading. On
the display of the operation panel a time indication is mentioned on the fourth line.
Message Time 50” Time 64” Time 87”
Please remove cart.
Ink Discharge 6 6 7
Please insert Cleaning cart
During washing wait for a while 20 22 29
Remove cassettes
During washing wait for a while 6 6 7
The end