User`s guide

Rockhopper II series printers – User’s Guide
120
AP-75095, Rev. 2.1, 18/08/2005
5.4.83. Centronics Initialize menu
Setup values of Centronics menu are set to the factory default settings.
* Centro. *
F1 →
No OK
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
<NO> No initialization.
OK To perform initialization.
Centronics
Initialize
- After setting, to shift to the previous hierarchy menu.
Refer to ‘Initialize setup menu’
5.4.84. Network Initialize menu
Setup values of Network menu are set to the factory default settings.
* Network *
F1 →
No OK
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
<NO> No initialization.
OK To perform initialization.
Network initialize
- After setting, to shift to the previous hierarchy menu.
Refer to ‘Initialize setup menu’
5.4.85. Utility Initialize menu
Setup values of Utility menu are set to the factory default settings.
* Utility *
F1 →
No OK
← F2
Current parameter →
- No - (1/1)
Setup items
Parameters Description
<NO> No initialization.
OK To perform initialization.
Utility initialize
- After setting, to shift to the previous hierarchy menu.
Refer to ‘Initialize setup menu’